MC510-50
Technical Resources
Motherboard Manual
Access the official Motherboard manual & OEM Resources from ASRock. This external link provides access to the complete motherboard manual, along with the latest BIOS updates and specific drivers for your system's motherboard
Motherboard Layout
BIOS Update
Warning: Never interrupt a BIOS update. If the update is interrupted, the system may become irreparable. Damage caused as a result of BIOS updates may not be covered by the system's warranty.
You can follow this how-to guide for installation instructions.
Internal Access
The MC510 can be opened by the user. This does not void the warranty, however, any damage caused by doing so will not be covered.
The following steps will walk you through opening your MC510 case, as well as auto-powering on and clearing CMOS.
The MC510 series chasses can be opened by removing the two screws from the back (indicated in the picture below). Slide the lid off towards the rear of the chassis.
Auto Power On
Auto Power On (older boards)
IMB-1212 motherboards manufactured before June 2020 use a different jumper for auto power on. This jumper is not present on the newer boards.
Locate the PWR_JP1 jumper indicated by the orange circle
Move PWR_JP1 over by 1 pin
The unit is now configured for auto power on
Clear CMOS
Unplug the system completely from power and all peripherals
Locate the clear CMOS jumper
Move the jumper over by 1 pin
Wait 30 seconds
Restore the jumper to its original position
The CMOS is now clear
Regulatory
Security Advisory
For the latest security advisories concerning OnLogic products, including vulnerability disclosures and necessary updates, please refer to our official Security Advisories page. It is recommended to regularly check this resource for critical security information. Access Security Advisories
Last updated