> For the complete documentation index, see [llms.txt](https://support.onlogic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.onlogic.com/product-documentation/panel-products/product-manual-template.md).

# ST100 Series

## <mark style="color:blue;">1 -</mark> <mark style="color:blue;">Product Overview</mark>

### <mark style="color:blue;">1.1 - Introduction</mark>

<figure><img src="https://3062424488-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FlLHqs7kbNoKOFTwGOfH6%2Fuploads%2FFt3rfFfs9IBWcydQ8MeU%2FST100_15_PCAP.5.png?alt=media&amp;token=d85b29ec-d7d5-4c92-8ec0-dc13a049dbe1" alt=""><figcaption></figcaption></figure>

The ST100 is a rugged, stainless steel industrial touch display designed for HMI applications, food & beverage processing, CNC machinery, and harsh industrial environments. Featuring an IP66/IP69K front bezel, the ST100 supports both Projected Capacitive (P-CAP) and 5-wire Resistive touch technologies across multiple display sizes.

For more information on accessories and additional features, visit the ST100 product page:

* <https://www.onlogic.com/store/st100/>

### <mark style="color:blue;">1.2 - Safety</mark> <a href="#mmm6g67oklt6" id="mmm6g67oklt6"></a>

<details>

<summary><mark style="color:blue;">Safety Precautions, Safeguards &#x26; Information</mark></summary>

<mark style="color:red;">Do not open and modify the device! The device complies with various national and international Safety, EMC and Environmental requirements per various standards.</mark>

<mark style="color:red;">Modification of the device may void certifications, warranty and/or cause possible injury to the user.</mark>

<mark style="color:blue;">Safe use and installation instructions</mark>

1. Care must be taken handling the device to prevent injury to self or possibility of damaging\
   the unit.
2. Read the entire manual before using the product.
3. Install the device securely per users manual instructions.
4. Wall or ceiling mounting device requires use of OnLogic mounting plate or bracket.
5. Use M3x0.5mm Flat Head screws to attach mounting plate or mounting brackets to threaded holes on bottom or rear of chassis. Screws should be a minimum length of 4mm. Add 1mm of screw length for every mm of additional thickness of plate or bracket beyond 1.5mm.
6. ![](https://3062424488-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FlLHqs7kbNoKOFTwGOfH6%2Fuploads%2Fe6vxOUHYrLploeVxc1TB%2Fimage.png?alt=media\&token=f4ff6ef4-b00b-41f6-acb2-451859db25f1)<mark style="color:red;">**Caution, Hot Surface!**</mark> <mark style="color:red;"></mark><mark style="color:red;">It is normal for the unit to heat up and be hot to touch.</mark> <mark style="color:red;"></mark><mark style="color:red;">**Do not touch**</mark> <mark style="color:red;"></mark><mark style="color:red;">the heatsink area or enclosure during operation and 30 minutes after shutdown allowing the unit to cool down.</mark>
7. Ambient operating temperature must be between 0 °C to 50 °C with a non-condensing relative humidity of 10-85%.
8. The device can be stored at temperatures between -10 °C to 85 °C. Note: Unit must be stabilized within operating temperature before use, minimum 3HR.
9. Keep the device away from liquids and flammable materials. Not to be installed in a hazardous environment.
10. Do not clean the device with liquids. The chassis can be cleaned with a dry cloth or duster only. To prevent injury to self and/or damage to the device the unit must be powered down and all connecting power and other peripherals shall be disconnected prior to cleaning.
11. Allow adequate space around all sides of the device for proper cooling and to not exceed its maximum operating temperature limit. If the device is mounted to a vertical surface then recommended device orientation is such that heatsink fins allow air to rise unobstructed. Alternative orientations may result in reduced operational temperature range.
12. This device is intended for indoor operation only.
13. ![](https://3062424488-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FlLHqs7kbNoKOFTwGOfH6%2Fuploads%2FziDqV0t1yN5nfXx0AFUs%2Fimage.png?alt=media\&token=1d7fe329-e3f8-471d-aecd-d2308a497db8) <mark style="color:red;">**Caution, Risk of Electric Shock!**</mark> Unit is powered by low voltage DC (Direct Current) only! Do not connect AC (Alternating Current) into the device!
14. To power the device use only UL ITE Listed external power supplies with DC output of 12-24VDC, see specs for details.
15. Install the device only with shielded network cables.
16. The installer should be experienced in aftermarket installation and familiar with general practices for installing electronics.
17. Service and repair of the device must be done by qualified skilled service personnel. This includes, but is not limited to, replacement of the CMOS battery. Replacement CMOS battery must be UL recognized and of a similar type as the original.
18. Proper disposal of the CMOS battery must comply with local governance.
19. Radio device is not intended for emergency service use.
20. To protect against excessive RF exposure, maintain at least 20cm from any user and the RF antennas. Only use provided dual band PIFA antennas with 2dBi/2dBi gain (2.4 and 5Ghz)\
    for Wifi/BT.
21. This equipment is not suitable for use in locations where children are likely to be present.

![](https://3062424488-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FlLHqs7kbNoKOFTwGOfH6%2Fuploads%2FTg87etqIL4RExWa13c9g%2Fimage.png?alt=media\&token=a29deb16-35e6-45d6-8e5c-e54d4720fc4c) **WARNING:** There is danger of explosion if the CMOS battery is replaced incorrectly. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion.

</details>

<details>

<summary><mark style="color:blue;">Précautions et guide d’installation</mark></summary>

<mark style="color:red;">Ne pas ouvrir et modifier l'appareil ! L'appareil est conforme à diverses exigences nationales et internationales en matière de sécurité, de CEM et d'environnement selon diverses normes.</mark>

<mark style="color:red;">La modification de l'appareil peut annuler les certifications, la garantie et/ou causer des blessures à l'utilisateur.</mark>

<mark style="color:blue;">Instructions d'utilisation et d'installation en toute sécurité</mark>

1. Des précautions doivent être prises lors de la manipulation de l'appareil pour éviter de se blesser ou d'endommager l'appareil.
2. Lisez l'intégralité du manuel avant d'utiliser le produit.
3. Installez l'appareil en toute sécurité selon les instructions du manuel de l'utilisateur.
4. Pour vous protéger contre une exposition RF excessive, maintenez au moins 20 cm de tout utilisateur et des antennes RF. Utilisez uniquement les antennes double bande fournies avec un gain de 2 dBi/2 dBi.
5. Le dispositif de montage mural ou au plafond nécessite l'utilisation d'une plaque ou d'un support de montage. La plaque ou le support doit être en métal et avoir une épaisseur minimale de 1 mm.
6. Utilisez des vis à tête plate M4x0,5 mm pour fixer la plaque de montage ou les supports de montage aux trous filetés au bas ou à l'arrière du châssis. Les vis doivent avoir une longueur minimale de 4 mm. Ajoutez 1 mm de longueur de vis pour chaque mm d'épaisseur supplémentaire de plaque ou de support au-delà de 1,5 mm.
7. ![](https://3062424488-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FlLHqs7kbNoKOFTwGOfH6%2Fuploads%2F2BKfMYEWqwLZlW0MiD3E%2Fimage.png?alt=media\&token=d190c909-ea48-4f1a-a7a0-821b4c3fc8f6)<mark style="color:red;">**Attention surface chaude!**</mark> <mark style="color:red;"></mark><mark style="color:red;">Il est normal que l'appareil chauffe et soit chaud au toucher. Ne touchez pas la zone du dissipateur thermique ou le boîtier pendant le fonctionnement et 30 minutes après l'arrêt pour permettre à l'unité de refroidir.</mark>
8. La température ambiante de fonctionnement doit être comprise entre 0 °C et 40 °C avec une humidité relative sans condensation de 10 à 85 %.
9. L'appareil peut être stocké à des températures comprises entre -10 °C et 85 °C. Remarque : L'unité doit être stabilisée à la température de fonctionnement avant utilisation, minimum 3 heures.
10. Gardez l'appareil à l'écart des liquides et des matériaux inflammables. Ne pas installer dans un environnement dangereux.
11. Ne nettoyez pas l'appareil avec des liquides. Le châssis peut être nettoyé uniquement avec un chiffon sec ou un plumeau. Pour éviter de se blesser et/ou d'endommager l'appareil, l'appareil doit être éteint et toutes les alimentations et autres périphériques doivent être déconnectés avant le nettoyage.
12. Prévoyez un espace suffisant autour de tous les côtés de l'appareil pour un refroidissement correct et pour ne pas dépasser sa limite de température de fonctionnement maximale. Si l'appareil est monté sur une surface verticale, l'orientation recommandée de l'appareil est telle que les ailettes du dissipateur thermique permettent à l'air de monter sans obstruction. Des orientations alternatives peuvent entraîner une plage de températures de fonctionnement réduite.
13. Cet appareil est destiné à une utilisation en intérieur uniquement.
14. ![](https://3062424488-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FlLHqs7kbNoKOFTwGOfH6%2Fuploads%2F1iwzHdHiP627fuIRUnlo%2Fimage.png?alt=media\&token=4eed99e1-162e-442f-aeb2-b22f1d035a32)<mark style="color:red;">**Attention, risque de choc électrique !**</mark> L'unité est alimentée uniquement par une basse tension CC (courant continu) ! Ne connectez pas le courant alternatif (courant alternatif) à l'appareil !
15. Pour alimenter l'appareil, utilisez uniquement des alimentations externes répertoriées UL ITE avec une sortie CC de 12-24 VCC, voir les spécifications pour plus de détails.
16. Les méthodes de câblage utilisées pour le raccordement de l'équipement à l'alimentation secteur doivent être conformes au Code national de l'électricité, NFPA 70, et au Code canadien de l'électricité, Partie I, CSA C22.1.
17. Prévoyez suffisamment d'espace pour les connexions de câblage du bornier afin que les fils ne se plient pas et soient protégés contre les dommages accidentels.
18. Installez l'appareil uniquement avec des câbles réseau blindés.
19. L'installateur doit avoir de l'expérience dans l'installation de pièces de rechange et être familiarisé avec les pratiques générales d'installation de composants électroniques.
20. L'appareil radio n'est pas destiné aux services d'urgence.
21. L'entretien et la réparation de l'appareil doivent être effectués par un personnel qualifié. Cela inclut, mais sans s'y limiter, le remplacement de la batterie CMOS. La batterie CMOS de remplacement doit être du même type que celle d'origine.
22. L'élimination appropriée de la batterie CMOS doit être conforme à la gouvernance locale.
23. Le produit doit uniquement être connecté à un routeur, un commutateur ou un équipement réseau similaire certifié
24. Le produit est destiné à une utilisation en intérieur uniquement.
25. Le produit ne peut pas être connecté au réseau public.
26. Cet équipement n'est pas adapté à une utilisation dans des endroits où des enfants sont susceptibles d'être présents.

![](https://3062424488-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FlLHqs7kbNoKOFTwGOfH6%2Fuploads%2FFYSWx8CbhhRQWFDCcj3I%2Fimage.png?alt=media\&token=4eb55944-346a-4a96-b571-6d9a457a56f7)**ATTENTION:** Il existe un risque d'explosion si la pile CMOS n'est pas remplacée correctement. L'élimination de la batterie dans le feu ou dans un four chaud, ou l'écrasement ou le découpage mécanique d'une batterie peut entraîner une explosion.

</details>

### <mark style="color:blue;">1.3 - Box Contents & Accessories</mark> <a href="#mmm6g67oklt6" id="mmm6g67oklt6"></a>

* 1x ST100 Industrial Touch Monitor
* 1x USB Cable (Touch Interface)
* 6x Panel Mounting Screws / Brackets

If you purchased additional items such as mounting brackets, power supplies or terminal block connectors, they will be located in an accessory box.

For more information on accessories and additional features, visit the ST100 Panel Product page.

ST100 Product Page: <https://www.onlogic.com/store/st100/>

### <mark style="color:blue;">1.4 - Product Specifications</mark> <a href="#jddbzfth62sn" id="jddbzfth62sn"></a>

<table data-header-hidden><thead><tr><th width="108"></th><th width="128"></th><th></th><th></th><th></th><th></th></tr></thead><tbody><tr><td><strong>Panel Size</strong></td><td><strong>Aspect Ratio</strong></td><td><strong>Resolution</strong></td><td><strong>Brightness</strong></td><td><strong>Touch Type</strong></td><td><strong>Viewing Angle</strong></td></tr><tr><td>10.1"</td><td>16:10</td><td>1280 x 800 (WXGA)</td><td>500 nits</td><td>5-Wire Resistive</td><td>170° / 170°</td></tr><tr><td>12.1"</td><td>4:3</td><td>1024 x 768 (XGA)</td><td>600 nits</td><td>P-CAP / 5-Wire Resistive</td><td>178° / 178°</td></tr><tr><td>15.1"</td><td>4:3</td><td>1024 x 768 (XGA)</td><td>350 nits</td><td>P-CAP / 5-Wire Resistive</td><td>176° / 176°</td></tr><tr><td>17.0"</td><td>5:4</td><td>1280 x 1024 (SXGA)</td><td>350 nits</td><td>P-CAP / 5-Wire Resistive</td><td>160° / 160°</td></tr><tr><td>19.0"</td><td>5:4</td><td>1280 x 1024 (SXGA)</td><td>350 nits</td><td>P-CAP / 5-Wire Resistive</td><td>170° / 160°</td></tr><tr><td>21.5"</td><td>16:9</td><td>1920 x 1080 (FHD)</td><td>250 nits</td><td>P-CAP / 5-Wire Resistive</td><td>178° / 178°</td></tr></tbody></table>

<table data-header-hidden><thead><tr><th width="108"></th><th width="128"></th><th></th><th></th><th></th><th></th><th></th></tr></thead><tbody><tr><td><strong>Panel</strong></td><td>Temperature (Operating) </td><td>Vibration Tolerance (Operating)</td><td><strong>IP Rating</strong></td><td><strong>Video Interface</strong></td><td><strong>Mounting Options</strong></td><td>Bezel Materal </td></tr><tr><td>ST100</td><td>-20~60°C</td><td>IEC 60068-2-64: 1.5Grms, random, 5~500 Hz, 1hr/axis</td><td>IP66 <br>IP69K</td><td>HDMI <br>VGA</td><td>Panel <br>VESA</td><td>SUS316</td></tr></tbody></table>

#### <mark style="color:$primary;">Type of Panel</mark>  <a href="#id-5y83d06b0h6u" id="id-5y83d06b0h6u"></a>

Standard Brightness 5-Wire Resistive or PCAP (Optically Bonded) touch options.

#### <mark style="color:$primary;">Regulatory:</mark>

FCC Part 15 Class A &#x20;

RoHS 3 Directive (2015/863/EU)&#x20;

WEEE Directive (2012/19/EU)

## <mark style="color:blue;">2 - Technical Specifications</mark>

### <mark style="color:blue;">2.1 - External Features</mark> <a href="#id-3asmuz5yourf" id="id-3asmuz5yourf"></a>

#### <mark style="color:blue;">Rear I/O Connections</mark> <a href="#owitqzrk38aq" id="owitqzrk38aq"></a>

* Video Inputs: 1x HDMI, 1x VGA (15-pin D-Sub)
* Touch Interfaces:
  * P-CAP Models: 1x USB Type-A
  * Resistive Models: 1x USB Type-A, 1x RS-232 (DB9)
* Power Input: 1x 2-Pin Terminal Block (12VDC)

#### <mark style="color:blue;">Type of Panel</mark>  <a href="#id-5y83d06b0h6u" id="id-5y83d06b0h6u"></a>

Standard Brightness Resistive or PCAP (Optically Bonded) touch options.

### <mark style="color:blue;">2.2 - Terminal Block Power Input</mark>

See below for the connector pinout which is also indicated on the terminal block mounting panel adjacent to the connector. Installation of DC Mains connection shall only be performed by skilled personnel and in accordance with your local and national electrical code (Example: NEC, CEC).

<figure><img src="https://3062424488-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FlLHqs7kbNoKOFTwGOfH6%2Fuploads%2FXyRmGnoWrXDkTRbggu53%2FST100%20Terminal.jpg?alt=media&amp;token=14dfb768-87db-4b6c-bf81-18fe1f92fa48" alt=""><figcaption></figcaption></figure>

| Pin | Function |
| --- | -------- |
| 1   | DC       |
| 2   | GND      |

### <mark style="color:$primary;">2.3 - OSD Controls & Functions</mark>

Physical control keys are located on the rear cover for display adjustment:

* Power Key: Toggle Display Power On/Off
* Auto Key: Automatic image adjustment for VGA signal source
* Menu Key: Open/Close On-Screen Display (OSD) main menu
* Up / Down Keys: Navigate settings and adjust values
* OSD Settings Menu: Brightness, Contrast, Color Adjustment, Color Temperature, Auto Color, Language

## <mark style="color:blue;">3 - Installation & Mechanical</mark>

### <mark style="color:blue;">3.1 - Physical Dimensions & Mounting Drawings</mark>

<table><thead><tr><th width="97">Display Size</th><th>Overall Dimensions (W x H x D)</th><th>Cut-Out Dimensions (W x H)</th><th width="157">Net Weight</th></tr></thead><tbody><tr><td>10.1"</td><td>290.0 x 208.0 32.5 mm</td><td>281.0 x 199.0 mm</td><td>3.0 kg / 6.6 lbs</td></tr><tr><td>12.1"</td><td>359.0 x 297.0 x 35.2 mm</td><td>350.0 x 288.0 mm</td><td>3.0 kg / 6.6 lbs</td></tr><tr><td>15.1"</td><td>406.7 x 330.3 x 35.7 mm</td><td>304.8 x 310.0 mm</td><td>5.15 kg / 11.3 lbs</td></tr><tr><td>17.0"</td><td>445.5 x 367.9 x 44.5 mm</td><td>435.5 x 369.0 mm</td><td>6.5 kg / 14.3 lbs</td></tr><tr><td>19.0"</td><td>521.0 x 415.0 x 41.5 mm</td><td>511.0 x 405.0 mm</td><td>8.5 kg  / 18.7 lbs</td></tr><tr><td>21.5"</td><td>568.0 x 364.0 x 40.5 mm</td><td>550.0 x 354.0 mm</td><td>10.0 kg / 22.0 lbs</td></tr></tbody></table>

{% file src="/files/aAFT4TO4R0BguUhi8jcc" %}

{% file src="/files/VByMPYVzgmySFulTyYU5" %}

{% file src="/files/zJFGcyYIrNaCuhhuwu2l" %}

{% file src="/files/93DJl9HQ0bvpUrif0b55" %}

{% file src="/files/1BT7COYw3shpXy9TY8J5" %}

{% file src="/files/Pd65Sb5U0zGXJK7788Tm" %}

### <mark style="color:blue;">3.2 - Mounting Installation</mark>

#### <mark style="color:$primary;">Panel Mounting</mark>

Insert the unit into the panel cutout from the front side. Fasten the 6 provided panel mounting clamps into the side keyholes and tighten evenly to create an IP66/IP69K front seal against the gasket.

#### <mark style="color:$primary;">VESA Mounting</mark>

Use standard M4 screws with maximum 4mm thread insertion depth into the rear VESA pattern.

The 10.1" model has a 75 x 75 mm VESA pattern, while the 12.1", 15.1", 17.0", 19.0", and 21.5" models use 100 x 100 mm VESA pattern.

### <mark style="color:blue;">3.3 - CAD & Drawings</mark>

{% file src="/files/5lTxVvlbIGraPyd5kkBG" %}

{% file src="/files/VzfiwG6NaTiatPgrDspQ" %}

{% file src="/files/bqefG4IoKYxqh7s7feev" %}

{% file src="/files/PqtMu6lfOAUtenKEJwNm" %}

{% file src="/files/PmtgsclPAEyWXJRmHzA8" %}

{% file src="/files/5dGfQeSU0sr7ePseB8t7" %}

## <mark style="color:blue;">4 - Touchscreen Integration & Setup</mark>

### <mark style="color:$primary;">4.1 - USB Touch Controller</mark>

The USB interface uses standard HID touch drivers natively supported by Windows 10/11, Linux, and Android OS without requiring third-party driver installations. Connect the supplied USB cable between the monitor's touch USB port and the host computer.

### <mark style="color:$primary;">4.2 - RS232 Serial Touch Controller (Resistive Models Only)</mark>

Resistive models include a dedicated RS-232 COM port for touch controller communication on legacy host systems. Serial touch controllers require eGalaxTouch or PenMount serial touch drivers installed on the host OS configured for the connected COM port.

### <mark style="color:blue;">4.3 - Drivers & Downloads</mark>

#### <mark style="color:blue;">Driver Downloads</mark> <a href="#microcontroller-updates" id="microcontroller-updates"></a>

| Operating System | Link                                                                                              |
| ---------------- | ------------------------------------------------------------------------------------------------- |
| Windows          | [Download](https://drive.google.com/file/d/1KJ5xFN2ho9nN278da-i_xjE1p_AJvHXP/view?usp=drive_link) |

**Instructions**

1\) If on Windows 10 or older Windows 11, you may need to download 7-zip to extract the .rar.

2\) Extract the .rar.

3\) Run Setup.exe and follow the instructions.

4\) Once installation is complete, there will be a system tray icon "PenMount Monitor" that you can click for options.

<table><thead><tr><th width="356">Operating System</th><th>Link</th></tr></thead><tbody><tr><td>Ubuntu 18.04</td><td><a href="https://drive.google.com/file/d/1SJGvfrk5uAXsGdsuhMYCbuUpN-bXjQnW/view?usp=drive_link">Download</a></td></tr><tr><td>Ubuntu 20.04</td><td><a href="https://drive.google.com/file/d/1SJGvfrk5uAXsGdsuhMYCbuUpN-bXjQnW/view?usp=drive_link">Download</a></td></tr><tr><td>Ubuntu 22.04</td><td><a href="https://drive.google.com/file/d/1SJGvfrk5uAXsGdsuhMYCbuUpN-bXjQnW/view?usp=drive_link">Download</a></td></tr><tr><td>Ubuntu 24.04</td><td><a href="https://drive.google.com/file/d/1NbzKEG8woLwiS5P5SuB95EK4x-xU_z86/view?usp=drive_link">Download</a></td></tr></tbody></table>

**Instructions**

1\) Log in using "Ubuntu on Xorg". Do this by right-clicking the gear icon on the login screen and selecting "Ubuntu on Xorg".

2\) Extract to the computer.

3\) Open a Terminal in the driver folder.

4\) Run:\
sudo bash ./install.sh

5\) Restart the system.

6\) Navigate to driver folder then \x86\_64.

7\) Run:\
sudo gPen

8\) This will open the PenMount utility for configuration and calibration.

## <mark style="color:blue;">5 - Support & Compliance</mark>

### <mark style="color:blue;">5.1 - FAQ</mark>

* **What is the power consumption of the ST100?**\
  The ST100 display operates on 12VDC. Typical power consumption ranges between 15W and 35W depending on display size and backlight brightness settings. The optional external power supply is rated for 60W (12V @ 5A).
* **Why is touch non-responsive?**\
  Ensure the USB touch cable is connected directly to the host PC. For resistive models using RS-232, verify the serial touch driver is assigned to the corresponding host COM port.

### <mark style="color:blue;">5.2 - Regulatory</mark>

#### CE <a href="#gb37l8aoz9ch" id="gb37l8aoz9ch"></a>

This device has been tested to the relevant EMC and Safety standards. Modifications by the user may invalidate certifications. Testing included EN 55032, EN 55035, EN 60601-1-2, EN 62368-1, and IEC 60945 Ed. 4.

#### FCC Statement <a href="#id-5hrwz6kt876t" id="id-5hrwz6kt876t"></a>

This device complies with part 15 of the FCC rules as a Class A device. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

#### ISED (Innovation, Science and Economic Development Canada) <a href="#iogze6y7rwzd" id="iogze6y7rwzd"></a>

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

#### **CAN ICES-003(A) / NMB-003(A)**

#### UKCA <a href="#synek56no4wr" id="synek56no4wr"></a>

The computer system was evaluated for medical, IT equipment, automotive, maritime and railway EMC standards as a class A device. The computer complies with the relevant IT equipment directives for the UKCA mark.

#### Download Documents

{% file src="/files/2LWtr1bOWLWMDhWKYKlH" %}

### <mark style="color:blue;">5.3 - Security Advisory</mark>

For the latest security advisories concerning OnLogic products, including vulnerability disclosures and necessary updates, please refer to our official Security Advisories page. It is recommended to regularly check this resource for critical security information.\
[**Access Security Advisories**](/support-articles/security-advisories.md)