MK200-60
Technical Resources
Motherboard
Manual & Drivers
Technical information related to the system's motherboard can be found from the support link below.
Startup Settings
Auto Power On
Power on the server and press F2 a few times to access the BIOS
Navigate to the Advanced tab
Open the Chipset Configuration menu
Locate the Restore AC Power Loss option
Change it to “Power ON’
Press F10 to save & exit, and enter to confirm
Auto power on is now enabled
Clear CMOS
If the server fails to power on or is unresponsive, clearing the CMOS may help. It will also restore the BIOS to factory defaults. Ensure this procedure is done in a static safe environment. A grounding strap is recommended.
Unplug the server completely from power and all peripherals
Remove one phillips screw from each side of the lid near the front
Loosen the 2 captive thumbscrews and slide the lid off towards the rear of the server.
Locate the clear CMOS solder pads
Using a flathead screwdriver or similar conductive tool, short the two pins together for 30 seconds
Slide the lid back on, reconnect the server, and power it on
It may reboot several times to re-detect hardware
If it continues to malfunction, contact technical support.
Security Advisory
For the latest security advisories concerning OnLogic products, including vulnerability disclosures and necessary updates, please refer to our official Security Advisories page. It is recommended to regularly check this resource for critical security information. Access Security Advisories
Last updated