Use these instructions to help assemble the LCM600Q-A power supply for use.
Part number LCM600Q-A
Remove the protective plastic cover
Remove the 4x Phillips screws
Thread the screws removed in the previous step through the ring terminals
Ensure the washer remains in place between the screw and terminal
Reinstall the screws to attach the ring terminals to the power supply
Firmly hand tighten
Verify the wire colors are in the proper order as shown
The black wires go under the V- label, the red wires go under V+
Snap the plastic cover back into place
The power supply is now ready for use
Power Supplies
PA-480W-DIN (480W DIN PSU)
Guide to assembling and connecting the PA-480W-DIN power supply, including wiring and safety checks.
Assembling the PA-480W Power Supply
Use these instructions to help assemble the PA-480W-DIN power supply for use.
Part number:
Connect wires to the +V and -V terminals. Make sure the terminal screws are hand-tight.
Connect the terminal block connectors to match your computer. Check the back of the system to the exact pinout.
The system’s manual can also be referenced for the proper wire pinout.
*Note: Incorrect system wiring may cause damage to the system
Connect your AC cable (such as the )
Doublecheck all connections, to make sure they are correct
