MC850-50 / MC850-51 / MC850-52 / MC850-54

Technical Resources

MC850-50

Motherboard

Manual, Drivers, Datasheet

Technical information related to the system's motherboard can be found from the support link below.

Startup Settings

Enabling Auto Power On

1. Locate the AT/ATX jumper

2. Move it over by 1 pin

3. Auto power on is now enabled

Clear CMOS

1. Locate the CLRMOS1 jumper

2. Move the jumper over by 1 pin

3. Wait 30 seconds

4. Restore the jumper to its original position

Technical information related to the system's motherboard can be found from the support link below.

1. Power on the unit and press the Del key to access the BIOS

2. Navigate to the Advanced tab

3. Open the System Configuration menu

4. Change “Restore AC Power Loss” to [Power On]

1. Locate the CMOS battery

2. Carefully remove it from the holder

3. Wait 5 minutes

4. Reinsert the battery

Technical information related to the system's motherboard can be found from the support link below.

1. Power on the unit and press the Del key to access the BIOS

2. Navigate to the Advanced tab

3. Open the Chipset Configuration menu

4. Change “Restore AC Power Loss” to [Power On]

1. Locate the clear CMOS pads

2. Short the two metal halves with a flathead screwdriver for 30 seconds

3. The CMOS is now clear

Technical information related to the system's motherboard can be found from the support link below.

1. Power on the unit and press the Del key to access the BIOS

2. Navigate to the Advanced tab

3. Open the Chipset Configuration menu

4. Change “Restore AC Power Loss” to [Power On]

1. Locate the clear CMOS pads

2. Short the two metal halves with a flathead screwdriver for 30 seconds

3. The CMOS is now clear

For the latest security advisories concerning OnLogic products, including vulnerability disclosures and necessary updates, please refer to our official Security Advisories page. It is recommended to regularly check this resource for critical security information.